Chapter 5 - System Setup Screens
5-2
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Introduction
The C-more touch panels include a series of built-in System Setup Screens that allow
the user to view detailed information about the panel; adjust certain features; configure
communications; test various functions of the touch panel; backup & restore firmware,
recipe, log and project memory; clear memory and reset all values and conditions back to the
original factory defaults.
The four Main Menu selections are:
Information
The information tabs display details about the touch panel model; the
panel’s name; version information for the hardware, boot loader and
firmware; clock source, and beeper status. Other tabs display details
on the panel’s internal memory and the status of any external memory
devices. Communication port details are available in this area, as well as an error log to help in
trouble-shooting the system
Setting
This is the area for 1.) making adjustments to the internal clock,
2.) adjusting the brightness of the display, 3.) setting the IP address 4.)
adjusting (calibrating) the touch panel, 4.) enabling or disabling the
internal beep, and 5.) enabling or disabling a mouse pointer.
Test Menu
From this sub menu, the user can 1.) test the touch panel, 2.) test the
display, 3.) test the user LED 4.) test the communication ports, and 5.)
test both the internal beeper or the audio line output, if a speaker with
an amplifier is connected. A WAV sound file is system provided for the
audio line output test.
Memory
Select the Memory menu item to either backup or restore your project,
log data, recipe data and/or system memory. Selections can be made to
backup to optional SD card memory or USB pen drive memory. The
menu selections also give the user the ability to clear the memory, and
there is also a selection to reset all of the touch panel settings back to the original factory
defaults.
To Next Page
Loading...