Chapter 5 - System Setup Screens
5-26
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Test Menu – Test Touch Panel
Using this test, normal or unusual
operation of the analog touch panel can be
determined.
Testing:
If an area of the touch screen is suspected to
be inoperable, touch that area of the screen
while in the Test Touch Panel screen
mode. The screen pixels should turn black
in that area. If the screen pixels do not turn
black when touched, then the touch screen
is defective or needs to be calibrated. See
Setting - Adjust Touch Screen
Item No. Function Description Comments
1 Touch area
Touch to turn on pixels on the screen.
Both the title bar (Test Touch Panel)
and Cancel button can be drawn
across to test the touch operation.
2 Cancel
Press to return to the Test Menu screen.
NOTE: The Touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same
time, an unexpected object may be activated.
2
1
To Next Page
Loading...