AutomationDirect C-more EA9-T7CL-R - Adjust Clock

Chapter 5 - System Setup Screens
5-19
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Setting – Adjust Clock
2
1
3
4
5
Item No. Function Description Comments
1 Select
Time: Each press of the Select button will
cycle thru the following settings.
1.) No Selection to Hours
2.) Hours to Minutes
3.) Minutes to Seconds
4.) Seconds back to Hours
Date: Each press of the Select button will
cycle thru the following settings.
1.) Month to Day
2.) Day to Year
3.) Year back to Month
2 Up
Press to increment the value by “1” with
each press.
3 Down
Press to decrement the value by “1” with
each press.
4 OK
Press to accept the changes.
5 Cancel
Press to return to the Setting Menu screen
without accepting the changes.
NOTE: The function buttons used to adjust the clock settings on the panel’s setup screen are disabled if an
External clock source is selected in the C-more programming software. The choice of an internal or external clock
source is available by selecting Clock Source in the C-more programming software under the Main Menu drop
down function Setup.
NOTE: The panel’s clock can also be adjusted from the C-more programming software. The Adjust Clock function
can be accessed in the software by selecting Adjust Clock under the Main Menu drop down function Panel or
selecting Adjust Clock under the Panel tab in the software’s Navigation window.