Chapter 1 - Getting Started
1-16
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Step 9 – Connect Touch Panel to PLC
• Connect the serial communications cable between the C-more touch panel and the PLC
• or connect the C-more touch panel and PLC together either directly or via an Ethernet switch, and
CAT5 Ethernet cables (full feature panels only)
For further information on setting up communications between a C-more panel and a PLC, see the
C-more programming help file topic CM129: Creating a New Project.
EA-2CBL-1
DL-06 PLC
C-more
Touch Panel
Port 2
Port 1
Serial
DL06 PLC
Stride™
Ethernet Switch
10/100 Base-T
(such as SE2-SW5U)
H0-ECOM/H0-ECOM100
Ethernet Module
Ethernet CAT5
Cable
C-more
Touch Panel
Auto MDI / MDI-X
Ethernet Port
Ethernet via Switch
DL06 PLC
H0-ECOM/H0-ECOMM100
Ethernet Module
Ethernet CAT5
Cable
Auto MDI / MDI-X
Ethernet Port
C-more
Touch Panel
Ethernet
To Next Page
Loading...