AutomationDirect C-more EA9-T7CL-R - AC;DC Power Adapter

Chapter 3 - Accessories
3-3
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
AC/DC Power Adapter
The optional C-more AC/DC Power Adapter can be used to power the C-more touch panels
from a 100-240 VAC, 50/60 Hertz, voltage source. The adapter provides 24 VDC @ 1.5 A
to the touch panel’s DC power connector and can be conveniently secured to the touch panel
with two captive screws. The adapter provides a power loss signal to the touch panel that
causes the touch panel to stop writing data to SD memory devices providing a controlled
shutdown for increased data logging reliability.
Part No. EA-AC
AC/DC Adapter Wiring
100 - 240 VAC
50/60 Hz
AC Power Adapter
Not recommended for use with the EA7-T15C
when operating temperatures are expected
to be above 40 deg C.
Recommended AC Supply Fuse
3.0 A time delay, ADC p/n MDL3
Tightening Torque
Power supply cable torque
71 - 85 oz-in (0.5 - 0.6 Nm)
Power connector mounting torque
71 - 85 oz-in (0.5 - 0.6 Nm)
Mounting flange screw torque
57 - 71 oz-in (0.4 - 0.5 Nm)
Warning: Use 60 / 75 °C copper conductors only.