Chapter 5 - System Setup Screens
5-33
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Test Menu – Test Beep/Sound
The internal Beeper can be tested from this system
setup screen whether the Beeper is enabled or disabled.
After the Beep Test button is pressed and released, the
Beeper will sound for 500 msec.
The Speaker Test function requires that a speaker(s)
with an amplifier (can be stereo) be connected to the
Audio Line Out stereo jack on the rear of the touch
panel.
After the Speaker Test button is pressed then released,
a system provided Test.WAV file will play once.
WARNING: Hearing damage may occur if the volume on the user supplied external amplified speaker
is set too high.
1
2
1
2
To Next Page
Loading...