Chapter 5 - System Setup Screens
5-5
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
System Setup Screens
The OK button in the Warning dialog box will bring up the Main Menu as shown below.
You can then proceed to the other system setup screens.
Password Protecting System Screen Access
NOTE: If the password system tag SYS SYSTEMSCREENPW is enabled, the Enter Security Code keypad shown
below will open. The procedure to enable the SYS SYSTEMSCREENPW is detailed below.
Entering the correct password will display the Panel Run Mode warning dialog described previously. PLC
communications continue while the keypad is displayed. The keypad will timeout after 60 seconds.
Cancel
Enter
Enter Security Code
CL0–
321
654
987
To Next Page
Loading...