Do you have a question about the Autonics CT6Y and is the answer not in the manual?
Brand | Autonics |
---|---|
Model | CT6Y |
Category | Cash Counter |
Language | English |
Wiring diagram for CT6Y model.
Wiring diagram for CT6Y-2P model.
Wiring diagram for CT6Y-I model.
Input circuit diagrams for NPN sensors.
Input circuit diagrams for PNP sensors.
Diagrams for contact and solid-state output connections.
Default configuration parameters for various models.
Steps to enter and operate in counter mode.
Procedures for modifying counter settings.
Guide to various counter setting parameters.
How to modify single preset values.
How to modify dual preset values.
How to set the batch counter value.
Procedures for resetting the batch count.
How to view the current batch count.
Batch counting for production or packaging.
Steps to enter and operate in timer mode.
Procedures for modifying timer settings.
Available time ranges for 6-digit and 4-digit types.
Guide to various timer setting parameters.
Instructions for setting the key lock function to prevent unauthorized operation.
Adjusting Toff and Ton times for FLK output.
Adjusting ON/OFF times for non-FLK output.
Setting batch count value for timer operation.
Procedures for resetting the timer batch count.
How to view the current batch count during timer operation.
Example of using batch counter in timer mode for production.
Timer operation with Flicker output mode.
Timer operation with Flicker 1 output mode.
Timer operation with Flicker 2 output mode.
Timer operation with Interval output mode.
Timer operation with Signal OFF Delay output mode.
Proper sequence for powering the unit on and off.
Recommendations for input signal cabling.
Instructions for selecting input logic type.
Environmental conditions to avoid for proper operation.