Need help?Do you have a question about the Autonics CT6M-2P series and is the answer not in the manual?
General| Model | CT6M-2P series |
|---|---|
| Type | Digital Timer |
| Output Type | Relay |
| Input Voltage | 100-240V AC |
| Contact Rating | 5A 250VAC / 30VDC (resistive load) |
| Display Type | LED |
| Display Digits | 4 |
| Operating Mode | ON-delay, Flicker, Interval, One-shot |
| Dimensions | 48 x 48 mm |
| Dielectric Strength | 2000V AC for 1 min |
| Vibration | 10 to 55Hz, amplitude 0.75mm (1.5mm P-P) in each X, Y, Z direction for 2 hours |
| Ambient Temperature | -10 to 55°C (14 to 131°F) |
| Storage Temperature | -25 to 65°C (-13 to 149°F) |
| Ambient Humidity | 35 to 85% RH (non-condensing) |
Illustrates wiring diagrams for connecting the CT Series units.
Explains how to connect input signals and output loads.
Covers fundamental operations and the functions of the CT Series.
Explains how to set parameters for counter operations.
Describes the different input modes for counting.
Explains the various output modes for counter operations.
Details how to set parameters for timer operations.
Explains the different output modes for timer operations.
To Next Page