Need help?Do you have a question about the Autonics CT6M-1P4 and is the answer not in the manual?
General| Model | CT6M-1P4 |
|---|---|
| Type | Digital Timer |
| Output Type | Relay |
| Number of Outputs | 1 |
| Display | 7-segment LED |
| Mounting Type | Panel Mount |
| Timing Range | 0.1 sec to 9999 hrs |
| Operation Mode | ON-delay, OFF-delay, Interval, Flicker, One-shot |
| Contact Capacity | 5A @ 250 VAC (resistive load) |
| Control Output | Relay Contact |
| Contact Rating | 5A, 250V AC/30V DC |
| Ambient Temperature | -10°C ~ 55°C |
| Ambient Humidity | 35 to 85% RH (with no condensation) |
Lists key communication, timing, and counting features.
Details wiring connections for CTS Series models.
Details wiring connections for CTY Series models.
Details wiring connections for CTM Series models.
Explains how to select NPN or PNP input logic.
Details wiring for NPN and PNP input types.
Details wiring for contact and solid state output types.
Overview of operational modes and key functions.
Explains how to change settings in RUN mode.
How to reset the counter/timer value.
Details operation, counting, output, and reset for BATCH counter.
Details counting charts for various input modes.
Details parameters for timer configuration.
Details time charts for various timer output modes.
Configures communication parameters for counters and timers.
Sets the unique address for each device on the bus.
Sets the data transmission speed for communication.
To Next Page