Need help?Do you have a question about the Autonics CT4S-2P series and is the answer not in the manual?
General| Model | CT4S-2P series |
|---|---|
| Time Range | 0.01 sec to 9999 hr |
| Output Type | Relay |
| Number of Digits | 4 |
| Power Supply Voltage | 100-240V AC |
| Display Type | LED |
| Operation Mode | ON-delay, Flicker, Interval, One-shot |
| Input Type | Voltage-free contact |
| Supply Voltage | 100-240V AC |
| Display | 7-segment LED |
| Contact Capacity | 5A at 250 VAC, 5A at 30 VDC (resistive load) |
| Contact Rating | 5A at 250 VAC, 5A at 30 VDC (resistive load) |
| Operating Temperature | -10°C to 55°C |
| Storage Temperature | -20°C to 65°C |
| Ambient Humidity | 35 to 85%RH (non-condensing) |
Details the product's features including prescale value, communication, and output modes.
Details wiring diagrams for CTS Series models including single and dual preset types.
Illustrates connection diagrams for CTY Series models with various output types.
Shows connection diagrams for CTM Series models, including communication and standard types.
Illustrates input connection methods for NPN and PNP sensors and contact inputs.
Shows output connection diagrams for contact and solid-state outputs.
Describes basic operations like RUN mode, key functions, and setting value changes.
Explains how to enter and perform setting value changes in RUN mode.
Details timer parameters: time range, UP/DOWN mode, indication, memory protection, output mode.
To Next Page