Need help?Do you have a question about the Autonics CT6S-2P4 and is the answer not in the manual?
Key features of the Counter/Timer series.
Details of included components and optional accessories.
Information on how to order specific models and configurations.
Detailed description of the product's parts and indicators.
Technical specifications for CTS, CTY, and CTM series models.
Common specifications like power, counter, and timer parameters.
Details on communication protocol, speed, parity, and stop bits.
Overall physical dimensions for CTS, CTY, and CTM series.
Required panel cutout sizes for installation.
Dimensions for the mounting bracket.
Wiring diagrams for CTS, CTY, and CTM series models.
Configuring input logic and connecting input signals.
How to connect contact and solid-state outputs.
General operations and functional explanations of the device.
Procedures for changing and checking setting values.
How to operate and use the BATCH counter feature.
Steps to enter and navigate through setting modes.
Configuration parameters for counter mode operation.
How different input modes affect counting behavior.
Behavior of outputs based on selected output modes.
Output behavior under specific conditions like start point.
Explanation and calculation of the prescale function.
Configuration parameters for timer mode operation.
How timer outputs behave in different operational modes.
How to set '0' time for specific timer output modes.
Settings for communication address, speed, parity, and stop bits.
Enabling communication write and system organization.
Information on the DAQMaster software for device management.
Methods for reading and writing parameter values via communication.
Default settings for common parameters like LOCK and PRESET.
Default settings for counter-specific parameters.
Default settings for timer-specific parameters.
Default settings for communication parameters.
To Next Page
General