Autonics CT6S-2P4 - Communication Write and System Setup

9 Communication
© Copyright Reserved Autonics Co., Ltd. 79
9.1.4 Communication Stop bit[
STP
]
Set communication stop bit as 1or 2.
9.1.5 Communication response waiting time [RSwT]
Set communication response waiting time as 5 to 99ms.
It is available to set according to communication speed..
 key: To shift flashing digits position of communication response waiting time.
 , key: To change the flashing digits position value.
When communication response waiting time is set as 15ms,
※Setting range by communication speed
Communication speed [bps]
Setting range [ms]
2400 16 to 99
4800 8 to 99
9600 5 to 99
19200 5 to 99
38400 5 to 99
9.1.6 Communication write [
COmW
]
Enables/Disables communication write from host (PC etc).
Loading via communication is available regardless of communication write setting.
※ENA: Permits communication write (enable)
DISA: Prohibits communication write (disable)