4. Working Environment Temp:-12℃-50℃
5. Special test clip: Double conductance Kelvin clamp
6. Housing Material: Acid-resistant ABS plastic
7. Measure Range: 30AH-200AH
8. Voltage Measure Range: 7-30VDC
How to use:
1. Connect the red test clamp with battery anode and the black one
with cathode, the tester will power on automatically. Voltage battery
below 7.0VDC can’t be tested properly, then press OK key to
continue.
2. According to the tester, you can press UP/DOWN key to
choose:
① Battery Test
② Cranking Test
③ Charging Test
④ Review Data
⑤ Print Data
⑥ Export Data to Computer
To Next Page
Loading...
