Autool BT360 - In-Vehicle vs. Out-of-Vehicle Testing

Test Status
In-Vechicle
Out-Of -Vechicle
●
●
●
Within the “Standard Test” function, choose the in-vehicle
test mode.
Select “Cranking Test”.
Follow on-screen prompts to start the engine; the test
results will be displayed.
Cranking Test Procedure
Good performance
12.90V
Life
Impedance
359CCA
95.5%
8.54mR
In-Vechicle
Standard test
Cranking test
Charging test
In-Vechicle
Standard test
Cranking test
Charging test
Input Standard
CCA
JIS
GB
Battery Type
Normal battery
AGM Flat Plate
AGM Spiral
7
Cranking test
Start Engine
Standard
Review data Set Up
Quick Test