Test Status
In-Vechicle
Out-Of -Vechicle
In-Vechicle
Standard test
Cranking test
Charging test
8
Charging test
Start engine and keep
idling, press OK to
continue
●
●
●
●
●
●
Within the “Standard Test” function, choose the in-vehicle
test mode.
Select “Charging Test”.
Follow on-screen prompts: start the engine and keep it
idling, then press “OK” to continue.
Follow on-screen prompts: turn on the load, increase
throttle, then press “OK” to continue.
Follow on-screen prompts: turn off the load, increase
acceleration, then press “OK” to continue.
View displayed test results.
Charging Test Procedure
Battery abnormal
CUR:
highest：
lowest：
14.3V
14.3V
9.1V
Standard
Review data Set Up
Quick Test
To Next Page
Loading...
