● Engine starting performance is displayed in 5 stages with
LED indicators to inform you of battery status.
● The battery is detected to be discharged due to forgetting
to turn off switches such as headlights and notifies you that it
needs to be recharged.
● A failure of the vehicle's charging system is detected and
you are notified that the vehicle needs to be inspected.
Precautions for using the car battery lifespan diagnose
unit
● Since this product needs to diagnose the status of the
battery when starting the car engine, it needs to be installed
and used on the battery with the car.
● This product determines the battery status at the time of
engine starting, as well as determines the battery status at the
time of engine stop. Please always use it together with the
battery.
● This product consumes very little current and has almost
no effect on the car battery even if it is kept always installed in
the car.
Installation
After confirming that the car battery is in normal condition,
please install the product in the following order.
● After connecting the⊕cable connector to the “+”
connector of the battery, insert the⊕side connector (red) of
this product into the bolt of the⊕side cable connector from the
side to firmly fix the nut.
● After connecting the cable connector to the “-”
connector of the battery, insert the side connector (black) of
this product into the bolt of the side cable connector from
2
To Next Page
Loading...
