can be removed.
● Before using double-sided adhesive tape to attach this
product, please wipe off all dirt (oil, dust) from the adhesive
surface with a cloth dampened with water.
● For vehicles with battery protection cover, please check
the installation space before installation.
● If the battery installed outside the engine compartment
has a battery protective cover, please install this product on
the inside of it.
● If the wires are too long and may come in contact with
moving parts such as valve covers or belt fans, keep the wires
in a ball when installing to avoid contact with moving parts.
● As it is necessary to read data when the product is in use,
please take care to leave a mounting space of about 1 cm
around the product.
● When this product is installed in the battery of a car
whose engine has stopped, please make sure to follow the
vehicle maintenance manual completely, otherwise you will be
responsible for the consequences.
● When this product is installed in a truck or other vehicle
where the battery location can be seen from the outside of the
vehicle, please install it in a place that is normally invisible
from the outside of the vehicle, but it can be seen during the
inspection.
How to interpret LEDs and how to deal with?
How to interpret the engine start performance LED and
how to deal with it
Engine starting performance of the battery is divided into 5
levels to display by LED.
4
To Next Page
Loading...
