MAINTENANCE SERVICE
Our products are made of long-lasting and durable mate-
rials, and we insist on perfect production process. Each
product leaves the factory after 35 procedures and 12
times of testing and inspection work, which ensures that
each product has excellent quality and performance.
●
Maintenance
To maintain the performance and appearance of the
product, it is recommended that the following product care
guidelines be read carefully：
Be careful not to rub the product against rough surfaces
or wear the product, especially the sheet metal housing.
Please regularly check the product parts that need to be
tightened and connected. If found loose, please tighten it
in time to ensure the safe operation of the equipment.
The external and internal parts of the equipment in
contact with various chemical media should be frequent-
ly treated with anti-corrosion treatment such as rust
removal and painting to improve the corrosion resistance
of the equipment and extend its service life.
Comply with the safe operating procedures and do not
overload the equipment. The safety guards of the
products are complete and reliable.
Unsafe factors are to be eliminated in time. The circuit
part should be checked thoroughly and the aging wires
should be replaced in time.
●
●
●
●
6
To Next Page
Loading...
Need help?
General
