Autool X50 Plus - Instrument Interface Settings; Car Speed Reset Settings; Factory Reset Settings

- 11 -
12. Car speed reset settings-In idle modes,
if the car speed is lower than the set value,
the car speed will be displayed as zero.
13. Fuel consumption data correction- If
there is an error between average fuel
consumption displayed in X50 Plus and
actual fuel consumption, adjust this
parameter. If the displayed fuel
consumption is bigger than the actual one,
decrease the percentage, otherwise
increase the percentage.
14. Factory reset settings-Choose this
function to restore X50 Plus data to initial
status.
■
Instrument interface settings
This function will configure contents
displayed in X50 Plus