Need help?Do you have a question about the Autopilot ECLIPSE F90 and is the answer not in the manual?
General| Brand | Autopilot |
|---|---|
| Model | ECLIPSE F90 |
| Category | Controller |
| Language | English |
Details how to use the control knobs for setting, recalling, and calibrating the unit.
How to set CO2 levels and deadband for optimal environmental control.
Controls simultaneous operation of CO2 and temperature outlets for efficiency.
Steps to set day and night temperature control points for growth.
Links temperature and humidity outlet operation for synchronized control.
How to set desired day and night humidity levels for optimal plant growth.
Specifies the unit's 5% relative humidity non-adjustable deadband.
Procedure to recall minimum and maximum humidity records.
Allows selection between dehumidifier or humidifier control modes.
Lists the available temperature deadband options (2/4/6°F).
How to set the target PPM and deadband for temperature control.
Explains different modes for controlling CO2 levels (PPM UP, Fuzzy Logic, PPM DOWN).
How the unit deactivates CO2 when temperature exceeds a set limit.
Step-by-step guide to setting the daytime high limit temperature.
Instructions for securing the controller to a wall using provided hardware.
Steps for attaching the controller to grow tent support rods.
Critical warning about protecting the sensor when using sulfur vaporizers.
To Next Page
