MOUNTING INSTRUCTIONS
MOUNTING THE UNIT TO A WALL
Secure the controller to the wall using the included mounting clips and screws.
MOUNTING THE UNIT TO A GROW TENT
Secure the controller to one of the grow tent’s vertical support rods with the included U-bolt
brackets.
1. Install on the inside of the grow tent.
2. Install on the outside of the grow tent (note that this method requires puncturing four holes
through the grow tent wall to allow the threaded ends of the U-bolts to emerge through the
grow tent’s fabric wall).
1 2
10
To Next Page
Loading...
Need help?
General
