• Do not use or install the heater in places where flammable vapors,
gases, or large amounts of dust may accumulate.
• Disable the heater when the vehicle or vessel is being fuelled.
• Do not cover the heater with clothing, pieces of fabric and so on, and
do not place such objects in front of the air intake.
• Do not install the fuel line inside the cabin of a vehicle.
• The installation configuration must exclude the possibility of
contact of the exhaust pipe with the air intake, fuel pipe, or other
flammable objects.
• The vehicle where the heater is installed must be equipped with a fire
extinguisher.
• Do not install the heater electric wiring (harnesses) near the fuel line
and the exhaust pipe.
• Disconnect the heater from its battery during repair work on the
heater.
• Do not connect the heater to the power circuit of the vessel, when the
engine is operating and there is no battery.
• Do not connect or disconnect heater connectors, when the heater is
powered.
• When electric welding is carried out on the vehicle, or repair work is
made on the heater, the heater must be disconnected from the battery.
• Disconnect the heater from the power supply when jumpstarting the
vehicle.
• Do not use fuses rated differently from indicated on the electric circuit
diagram.
• Do not use makeshift devices (wires etc.) instead of fuses.
To Next Page
Loading...
Need help?
General
