★ l.General information
1. Hold the remote controller towards to the receiver on the air-conditioner.
2. The remote controller should be within 8 meters away from the receiver.
3. No obstacles between the remote controller and receiver.
4. Do not drop or throw the remote controller.
5. Do not put the remote controller under the strong sun rays or heating facilities
and other heating sources.
6. Use two (7#) batteries; do not use the electric batteries.
7. Take the batteries out of remote controller for long time no use.
8. When the noise of transmitting signal can't be heard indoor unit or the
transmission symbol on the display screen doesn't flare, batteries need be
replaced.
9. If reset phenomenon occurs on pressing the button of the remote controller,
the electric quantity is deficient and new batteries need to be substituted.
10. The waste battery should be disposed properly.
Note:
* The picture is general remote controller, contains almost all of the
function buttons. They may be slightly different from material object
(depend on model).
* Ail the figures above are the displays after being initially electrified
or re-electrified after power off. In actual operations, the remote
controller screen displays related items only.
* The cooling only units don't have the function of heating or electric
heating. When the remote controller turns to such function buttons,
the units will not result such effect. Please don't turn the remote
controller to such buttons.
To Next Page
Loading...
