How to fix communication error between AUX Inverter outdoor and indoor unit?
If you're experiencing a communication error between the outdoor and indoor units of your AUX Inverter, the first step is to check the wiring and connections between these units to ensure they are properly connected.
What to do if my AUX Inverter has a drainage fault?
If your AUX Inverter is experiencing drainage issues, clear any blockages in the drainage system to ensure proper water flow.
How to troubleshoot over-voltage or low voltage protection fault on AUX Inverter?
If your AUX Inverter is showing an over-voltage or low voltage protection fault, check the electrical supply voltage to ensure it is within the correct range.
What causes a low pressure fault in AUX Inverter and how to fix it?
If your AUX Inverter indicates a low pressure fault, check the refrigerant levels to ensure they are adequate for proper operation.
How to fix fault with the fan motor of outdoor unit in AUX Inverter?
If you're having trouble with the fan motor of the outdoor unit of your AUX Inverter, check the outdoor fan motor to ensure it is functioning correctly.
What to do if AUX Inverter compressor fails to start?
If your AUX Inverter is experiencing issues with the compressor start, check the compressor start relay.
How to fix a fault with the high pressure switch on AUX Inverter?
If you encounter a fault with the high pressure switch in your AUX Inverter, check and replace the high pressure switch as needed.
How do I troubleshoot the anti-frozen protection fault on my AUX Inverter?
If your AUX Inverter shows a fault with anti-frozen protection of the indoor unit in heating mode, check for airflow blockages.
What to do if temperature sensor (Tcm) on AUX Inverter outdoor unit is faulty?
If your AUX Inverter is showing a fault with the temperature sensor on the outdoor unit, replace the temperature sensor.
How to fix a fault with the temperature sensor (Ticm) on the indoor unit of AUX Inverter?
If your AUX Inverter indicates a fault with the temperature sensor on the indoor unit, replace the indoor temperature sensor.
Explains the model coding system for indoor and outdoor units.
Shows pictures and capacity ranges for different indoor unit series.
Lists suggested indoor/outdoor unit combinations for various capacities.
Lists included accessories for outdoor and indoor units by model.
Details refrigerant, efficiency, reliability, and sine wave control.
Highlights advantages and drainage connection for wall-mounted AC units.
Describes cassette units and their built-in drain pump.
Details ceiling/floor units, 3D air swing, and centrifugal fan.
Explains duct units, flexible air intake, and ultra-slim design.
Describes the optional WiFi module for remote monitoring and control.
Piping diagrams for 14K and 18K models.
Piping diagrams for 21K and 27K models.
Placeholder for 36K piping details.
Placeholder for 42K piping details.
Detailed specs for Wall Mounted units (L, F, J series).
Specs for Cassette units (09K, 12K, 18K).
Specs for Ceiling Floor units (09K, 12K, 18K).
Specs for Duct units (07K, 09K, 12K, 18K).
Specs for Outdoor Units (14K to 42K).
Dimensional drawings for Wall Mounted units.
Dimensional drawings for Cassette units.
Dimensional drawings for Ceiling Floor units.
Dimensional drawings for Duct units.
Dimensional drawings for Outdoor Units.
Electrical schematic for Wall Mounted units.
Electrical schematic for Cassette units.
Electrical schematic for Ceiling Floor units.
Electrical schematic for Duct units.
Electrical schematic for Outdoor Units.
Defines operational limits for cooling and heating.
Coefficients for adjusting cooling capacity based on ambient temp.
Piping length specs and cautions for performance.
Coefficients for adjusting capacity based on height differences.
Method for converting bends/loops to equivalent length.
Static pressure curves for 07K/09K Duct models.
Static pressure curves for 12K Duct model.
Static pressure curves for 18K Duct model.
Overview of standard and optional controllers for different unit types.
Tables for setting indoor unit parameters via remote or wired controllers.
Function and setting of the Room Card for standby mode control.
Wi-Fi module configuration, installation, and app usage.
Exploded view of Wall Mounted unit with numbered parts.
Exploded view of Cassette unit with numbered parts.
Exploded view of Ceiling Floor unit with numbered parts.
Exploded view of Duct unit with numbered parts.
Exploded view of Outdoor Unit with numbered parts.
Lists necessary spare parts and tools for installation.
Outlines critical precautions for installation location and safety.
Installation details for Wall Mounted units.
Installation drawing and distance guidelines for Cassette units.
Installation spacing and suspension for Ceiling Floor units.
Installation spacing and suspension for Duct units.
Installation location, foundation, and transport for Outdoor Units.
PCB layout and modular connections for Outdoor Units.
PCB layouts and connections for Indoor Units.
Lists error codes and their descriptions.
Flowcharts for diagnosing communication failures.
General| Brand | AUX |
|---|---|
| Model | L Series |
| Category | Air Conditioner |
| Language | English |
To Next Page
