AUX DC Inverter Free Match 50HZ R32
134
3. Room Card Function
3.1 Function setting
Parameter
setting
Model
State
Operation model specification
0900
（default)
Stand
0901
Room Card
(optional)
T
he IDU Will be into standby mode, can be
controlled by controller
The IDU Will be into standby mode,
controlled by controller
※ How to set the room card function ( Set method same as the above【Part 9 →2.2Parameter
Setting by YK-L or 2.3 Parameter Setting by XK-04/XK-05 】
For example (XK-05)
Step 1
① Press “FUNCTION” for 5S,enter parameter check
② Press the“ ”or“ ”button to get “09 39”
③ Press “FUNCTION” for 5S again, enter parameter setting
model;
To Next Page
Loading...
Need help?
General
