21
Installing and Removing the Drip Tray
1. To install the drip tray, simply slide
it into the area at the top of the door
until it snaps into place.
2. To remove the drip tray, place your
fingers in the grid of thte drip tray with
one hand and hold the door of the
cooler shut with the other.
3. Gently pull the drip tray toward
you to release it. Once it has been
released you can remove the drip
tray from the door of the cooler to
empty it.
No external drain is needed, the overflow will collect here. The red float will rise to
indicate when the drip tray needs to be emptied.
Getting Started
To Next Page
Loading...
