29
Rinsing, Cleaning, and Draining
6. Place a large bucket beneath the hot drain
(#15) and cold drain (#16) located on the
back of the unit. Remove the drain covers and
allow the water to drain from the unit. Water
will start flowing as soon as the drain covers
are removed.
5. Pour 0.6 gallons of clean water into the
water reservoir.
Caution: The dispenser will heat water to a temperature of approximately 185°F.
It can cause severe burns if not handled carefully. Please use caution while operating
and cleaning. Please allow ample time for any hot water inside the machine to cool
down before draining it.
Cleaning
To Next Page
Loading...
