To Next PageTo Next Page
Need help?Do you have a question about the Avalue Technology EBM-LX800 and is the answer not in the manual?
Details electrical safety, grounding, and handling of sensitive components to prevent damage.
Lists all components and materials shipped with the EBM-LX800 module.
Provides a visual guide to the motherboard layout, identifying key connectors and components.
Catalogues all jumpers and connectors, detailing their function and physical specifications.
Explains how to configure the system by setting jumpers and connecting external devices.
Configures the power supply mode between AT and ATX standards using a jumper.
Resets the system's BIOS settings to default values via the Clear CMOS jumper.
Allows selection of the signal for pin 8 on COM1-4 serial connectors using the JRI1 jumper.
Configures Serial Port 2 for RS-422/485 communication protocols.
Describes the auxiliary power input connector and its role in system power.
Details the pinout and function of the internal audio input connector.
Specifies the connection for the LCD backlight inverter and brightness control.
Provides detailed signal definitions for the LCD inverter connector.
Outlines the pin configuration for connecting CD-ROM audio input.
Allows configuration of the Compact Flash card as Master or Slave device.
Details the pin assignments for Serial Ports 1, 3, and 4.
Specifies the pinout for Serial Port 2 when configured for RS-232 communication.
Lists the pin assignments for the Serial Port 5 and 6 connectors.
Describes the pinout for the general-purpose Digital Input/Output connector.
Details connections for system power, reset, LEDs, and other front panel functions.
Specifies the pin configuration for the IrDA infrared communication port.
Lists the pin assignments for connecting a PS/2 keyboard and mouse.
Details the LVDS connector for connecting compatible flat panel displays.
Explains the I²C interface signals for LVDS panel parameter EEPROM communication.
Details the pinout for Serial Port 2 when configured for RS-422/485 communication.
Lists the pin assignments for connecting a Thin-Film Transistor (TFT) display.
Describes signals for TFT panel data, synchronization, and backlight control.
Maps signals to specific data bits for 18-bit and 24-bit TFT displays.
Details the pin assignments for the USB 1.1 and USB 2.0 connectors.
Lists the pin configuration for the standard Video Graphics Array (VGA) output.
Specifies the connector for adjusting LCD backlight intensity via a variable resistor.
Details the pin assignments for the standard parallel port (LPT).
Lists the pin configuration for the main ATX power input connector.
Details the pin assignments for the secondary power input connector.
General| Form Factor | Mini-ITX |
|---|---|
| CPU | AMD Geode LX800 |
| Chipset | AMD Geode LX800 + CS5536 |
| Max Memory Size | 1 GB |
| Expansion Slots | 1 x PCI |
| USB Ports | 4 x USB 2.0 |
| Operating Temperature | 0°C to 60°C |
| Storage Interfaces | 1 x IDE |
| Video Outputs | VGA |
| LAN | Realtek RTL8100C (10/100Mbps) |
| Serial Ports | 4 x RS-232 |
| Parallel Port | 1 x Parallel Port |
| Power Supply | DC |
