Need help?Do you have a question about the Avalue Technology ENX-LX800 and is the answer not in the manual?
Guidelines to prevent electrical shock and hazards during system operation and maintenance.
Best practices for safe installation, handling, and environmental conditions for the motherboard.
Information on obtaining help and resources for system issues and guidance.
Explanation of symbols and notations used throughout the manual for clarity.
Important safety precautions to follow before installing motherboard components or changing settings.
Correct orientation for installing the motherboard into the chassis.
Instructions on using screws to secure the motherboard to the chassis.
Detailed listing of slots, jumpers, and rear panel connectors with their functions.
Step-by-step guide for physically installing an expansion card into a slot.
Instructions for setting up software and BIOS for newly installed expansion cards.
How to use the J3 jumper to clear CMOS memory and reset system parameters.
Details for the LCD Backlight Brightness Adjustment Connector (LCDPJ1).
Configuration options for COM1/COM2 RI/+5V and +5V/+12V selection.
Description and function of connectors located on the motherboard's rear panel.
Details on CF Power, ATX Power, and Power Fan connectors.
Information on SM Bus, Serial Port 1 & 2 connectors for data communication.
Connector for Infrared Data Association port.
Connector for primary IDE devices like hard drives.
Connectors for AC97 audio input and output.
Connector for General Purpose Input/Output signals.
Connector for LCD inverter and backlight control.
Connector for Low-Voltage Differential Signaling displays.
Connector for Transistor-Transistor Logic displays.
Connector for Universal Serial Bus 2.0 devices.
General| Brand | Avalue Technology |
|---|---|
| Model | ENX-LX800 |
| Category | Motherboard |
| Language | English |
To Next Page