28 (30)
Checking blade synchronization:
1. Lift the mower slightly off the ground and
turn the loader engine off. Follow safe
stopping procedure.
2. Rotate the blades manually. Set one of the
blades to its vertical position. The other
blade should be perpendicular to it, as
shown in adjacent figure.
3. If the blades are not perpendicular to each
other, the synchronization must be adjusted
by loosening the toothed belt as described
in previous chapter.
8. Warranty terms
Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it
manufactures.
The warranty covers repair costs as follows:
Work costs are covered, if the repair is not performed at the factory.
The factory replaces any defective components or consumables.
The factory may reimburse the price of components purchased by the customer in special cases that have
been agreed in advance.
The warranty does not cover:
Normal maintenance work or parts and consumables required for it.
Damages caused by unusual operating conditions or ways of use, negligence, structural changes made
without the consent of Avant Tecno Oy, use of non-original parts or lack of maintenance.
Consequences of a defect, such as interruption of work or other possible additional damages.
Travel and/or freight costs caused by the repair.
To Next Page
Loading...
