www.avantgarde-acoustic.de page 6
Version 1.4 – May 25, 2007
SOLO
OPERATING INSTRUCTIONS
SYSTEM INSTALLATION
GENERAL PRECAUTIONS
IMPORTANT
The power to all components must be switched OFF
or they must be disconnected from the household
AC plug before making any Audio connections.
To prevent misfunction/defects, do not operate
components with open input/output terminals.
Before making any AC power connections, all
components have to be properly installed and
connected.
CAUTION
Control the polarity! Never mix up + and —.
Wrong polarity will deteriorate the sound quality
and can damage amplifier and the active power
module of the speaker.
Do not short circuit the +/— poles of the
speaker cables.
Control the polarity of the XLR cables:
PIN 1 = GROUND
PIN 2 = SIGNAL (in phase)
PIN 3 = SIGNAL (inverted)
To Next Page
Loading...
