Avanti Runner 2000 - 10 Appendix B: Daily Inspection Checklist of Runner 2000;2002

To Next Page

To Previous Page

ISSUE DESCRIPTION PASS FAIL

Is the runner´s body free of corrosion, deformation and other

damages? (See Fig. 1)

COMMENTS

Is the brake lever free of corrosion, deformation and other dama-

ges? (See Fig. 2)

COMMENTS

Is the middle plate tightly attached by the 4 xed rivets? (See Fig. 3)

COMMENTS

Is the middle plate free of deformation? (See Fig. 3)

COMMENTS

Is the aluminium serial plate tightly attached by the 2 xed rivets?

(See Fig. 4)

COMMENTS

Are the synthetic guides tightly seated and without bruises and

marks? (See Fig. 5)

COMMENTS

Is the blank aluminium plate present and sitting tight? (See Fig. 6)

COMMENTS

Does the shock absorber show a normal shape? Are the absorber

and the cover free of cuts, burns, seams and visible signs of wear?

(See Fig. 7)

COMMENTS

ISSUE DESCRIPTION PASS FAIL

Is the carabiner free of marks, deformities, wear and traces of corro-

sion? (See Fig. 8)

COMMENTS

Is the return spring and articulation of the carabiner opening, closing

and locking properly? (See Fig. 9)

COMMENTS

Does the black strap of the shock absorber cover the carabiner end

completely? (See Fig. 10)

COMMENTS

Does the runner close and open easily without friction or resi-

stance? (See Fig. 11)

COMMENTS

Does the brake lever move up and down smoothly? (See Fig. 12)

COMMENTS

Is the spring securely attached? Is it retracting the lever automati-

cally? (See Fig. 12)

COMMENTS

Is the shackle securely attached and free from marks, deformities,

wear and traces of corrosion? (See Fig. 13)

COMMENTS

Does the runner slide smoothly along the rail? (See Fig. 13)

COMMENTS

Is the circular inspection sticker present? Has the due date for

annual inspection not expired? (See Fig. 12)

COMMENTS

Appendix B: Daily inspection checklist of Runner 2000/2002

VISUAL TEST

Main Page

Avanti Runner 2000 - 10 Appendix B: Daily Inspection Checklist of Runner 2000;2002

Table of Contents