To Next Page
S
steelelauraAug 1, 2025
What to do if the spark strikes but the flame does not ignite on my Avanzini DRAGO P1 PLUS?
- LLaura DavisAug 1, 2025
If the spark strikes but the flame doesn't ignite on your Avanzini Burner, ensure all gas system valves between the burner and the counter, including the safety solenoid valves, are open. Disassemble the burner to clean it by turning it over and blowing compressed air from the air intake and flame breaker if needed. Also, check the white power cable for any damage and verify the integrity and positioning of the ignition electrode; replace it if cracked. If problems persist, consider replacing the pilot flame assembly.
General
