MAKING THREE-WAY CALLS
The simplest way to set up a multi-party call is to use the conference guide (see page
10). You can connect another party to an on-going call as follows. During a call, the
button acts as Flash/R-pulse, which means it transmits commands to the PBX.
If you experience problems making multi-party calls: Please contact your telephone
administrator. Turn to page 12 for more details.
Press (F).
A second dialling tone is heard.
Dial the second participant’s number and wait for an answer.
Press the (F) button and then 3.
All three participants are now linked together in one call.
If you don’t get an answer when you dial the second number
Go back to the rst call by pressing (F).
ANSWERING AND MAKING CALLS
To Next Page
Loading...
