10GBASE-LRM SFP+ specifications
The 10GBASE-LRM SFP+ transceiver provides 10 GbE service at a wavelength of 1310 nm. This
SFP+ transceiver can attain a reach of up to 220 m on 62.5 μm multimode fiber.
The following table lists the transmitter and receiver specifications for the 10GBASE-LRM SFP+
transceiver. These parameters meet the IEEE 802.3aq-2006 standard. The part number of this SFP
+ transceiver is AA1403017-E6.
In this table, the OMA, average launch power, and peak power specifications apply at TP2, after
accounting for patch cord loss.
Table 20: IEEE 802.3aq 10GBASE-LRM SFP+ transceiver specifications
Parameter Specifications
Data rate 10 Gbps
Line rate (64B/66B code) 10.3125 Gbps ± 100 ppm
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 220 m
Link optical power budget 1.7 to 1.9 dB
Maximum transmitter waveform and dispersion
penalty (TWDP)
4.7 dB
Transmitter characteristics
Average launch power –6.5 to 0.5 dBm
Peak launch power 3 dBm
Root-mean-square spectral width 2.4 to 4 nm
Launch power in OMA –4.5 to 1.5 dBm
Minimum extinction ratio 3.5 dB
Optical return loss tolerance (minimum) –20 dB
Receiver characteristics
Receiver damage threshold 1.5 dBm
Receiver reflectance (maximum) –12 dB
For more information about the conditions used for the stressed receiver tests, and other
information, see the IEEE 802.3–2012 standard.
The following table (from IEEE 802.3–2012) describes the maximum channel insertion loss. The
channel insertion loss includes both attenuation and connector loss (1.5 dB); therefore the maximum
fiber attenuation is 0.2 to 0.4 dB.
SFP+ specifications
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
