Table 22: IEEE 802.3ae 10GBASE-LR/LW SFP+ transceiver specifications
Parameter Specifications
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 10 km
Link optical power budget 9.4 dB
Maximum transmitter and dispersion penalty 3.2 dB at 10 km
Transmitter characteristics
Line rate (nominal 10GBASE-LR 10.3125 Gbps ±100 ppm (10 GbE)
Average launch power –8.2 to 0.5 dBm
Minimum launch power in OMA minus transmission
and dispersion penalty (TDP)
–6.2 dBm
Minimum optical modulation amplitude –5.2 dBm
Minimum extinction ratio 3.5 dB
Maximum optical return loss tolerance –12 dB
Maximum transmitter reflectance –12 dB
Receiver characteristics
Line rate (nominal) 10GBASE-LR 10.3125 Gbps ± 100 ppm (10 GbE)
Average receive power for BER 10
-12
–14.4 dBm to 0.5 dBm
Receiver damage threshold 1.5 dBm
Maximum receiver sensitivity in OMA –12.6 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –10.3 dBm
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown for
safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shutdown condition.
10GBASE-ER/EW SFP+ specifications
The 10GBASE-ER/EW SFP+ transceiver provides a reach of up to 40 km at a wavelength of 1550
nm.
For more information about the 10GBASE-ER/EW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403013-E6.
Table 23: IEEE 802.3ae 10GBASE-ER/EW SFP+ transceiver specifications
Parameter
Specifications
Line rate (nominal) 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm (10 GbE)
Table continues…
SFP+ specifications
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
