Table 24: 10GBASE-CX cables
Cable length Part number
3 meter AA1403019-E6
5 meter AA1403020-E6
10 meter AA1403018-E6
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403016-E6.
Warning:
Risk of BER increase
For proper SFP+ transceiver operation, ensure that at least 11 dB of attenuation is present
between the transmit and receive ports.
The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1550 nm.
Table 25: 10GBASE-ZR/ZW SFP+ specifications
Parameter Specifications
Line rate (nominal) 10GBASE-ZR 10.3125 Gbps ±100 ppm (10 GbE)
Distance Up to 70 km *
Link optical power budget 24 dB
Dispersion power penalty 3.0 dB at 70 km (G.652 fiber)
Minimum attenuation between transmit and receive
ports
11 dB
Transmitter characteristics
Center wavelength range 1530 to 1565 nm, nominal 1550 nm
Average launch power 0 to 4.0 dBm
Optical modulation amplitude (minimum) –1.7 dBm
Extinction ratio (ER) (minimum) 8.2 dB
Maximum transmitter reflectance –12 dB
Receiver characteristics
Wavelength range 1280 to 1575 nm. Sensitivity specified for 1530 to
1565 nm.
Maximum receiver sensitivity (average power) –24 dBm
Maximum receiver (average) power, BER 10
-12
–7.0 dBm
Receiver damage threshold (average power) +5.0 dBm
Receiver reflectance (maximum) –27 dB
SFP+ specifications
July 2015 Installing Transceivers and Optical Components on Avaya ERS 3500 Series 47
Comments on this document? infodev@avaya.com
To Next Page
Loading...
