avenli SPA3 - RCD Test; Grounding

• A level place in order to avoid any defect, hernia or leakage.
• Wide enough to support the pool and its pump unit.
• Able to support more than 500 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
• Devoid of aggressive vegetation on the ground.
Failure to comply with these rules may result in property damage or personal injury.
RCD test
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter - Troubleshooting
Grounding
You are recommended to use the services of a qualified electrician to ensure that the
spa is electrically grounded by using a copper conductor of at least 2.5 mm² cross
section.
A place with an awning
Clean the place
A level place
1. Insert the plug
into the power
outlet.
2. Press the
«RESET» button, the
indicator light turns
red.
3. Press the «TEST»
button, the
indicator light
turns off.
4. Press the «RESET»
button,
the indicator
light turns red. The
RCD works properly.