1) Unfold the inflatable
spa over the base
protector.
2) Before inflating, assemble
connecting tube into SPA
pool
3) Inspect spring inside
valve in the upspring
status
4) Connect the inflation
hose to the pump on the
socket.
5) Insert the inflation hose
into the inflatable spa.
6) Connect the pump unit
then press the button to
inflate the spa.
7) Wait 60 seconds for
SPA shaping
8) Complete inflating and
remove the inflate tube
9) Insure valve tightened
by tools.
10) Screw the cap firmly in
place.
11) Connect the unit pump
to the pool using the 3
connectors to screw. Ensure
the icons on the pump and
the pool match up.
12) Cartridge location as
shown.
To Next Page
Loading...
