14
e. Test Camera: Click the “Test Camera” to check the camera video display status. You can adjust
the camera direction and view of the zoom in/out. To leave the page, click the Abort Diagnostic
button.
f. Update Now: Allows the user to update the CAM520 camera’s firmware.
1. Click” Update Now”.
2. A dialog will display the current firmware version and available new firmware version (internet
connection is required).
3. To auto update, click “Auto Update” and update process will start. The new firmware will be
downloaded first; then, the new firmware will be uploaded to camera.
[Note] Please make sure camera, power, and laptop/PC are all well connected and stay
connected during the entire process.
To Next Page
Loading...
