21
Preset
Setup preset position and view preset position.
1. Select the “Preset” tab in live view interface.
2. Use , , , and to adjust camera view position.
3. Enter preset position number (0~255) in Save Preset column and select “Save” to save the
position.
4. To call the preset position, enter a preset number (0~255) in Load Preset column or select the
preset number (0~19) from Quick Call section.
5. Preset Image Switch Freeze: On/Off the screen view freeze function. When “Preset Image
Switch Freeze” is on, during the preset operation, the screen will freeze until the operation is
done.
To Next Page
Loading...
