27
SmartFrame
Press button 2 seconds on the remote controller, it will enable to auto focus the face of object
and zoom in.
Select “Enable” to activate the function.
System
The system information of Camera is displayed in this page, including Model name, IP address, MAC
address, and firmware version.
The user can update firmware and reset to Factory default in this page. The user can also set the OSD
display output to HDMI or 3G-SDI interface.
Using RTSP Connect to Camera
To use RSTP player connecting to the camera; please enter the following RTSP URL in your
application such as VLC, PotPlayer or Quick Time.
“rtsp://IP address of PTZ310/330/310W/330W/live_st1”
To Next Page
Loading...
