45
System
System information: It displays Model Name, IP Address, Serial Number, MAC Address and
Firmware Version.
Factory Default: Reset the camera back to factory default value.
Login in: The default login in name and password are admin/admin. User can change if needed.
Status OSD: Enable/disable Preset status (Save Preset, Call Preset, Cancel Preset) display on
the screen.
Language: Change the Web UI language.
Camera ID (NDI): Set the camera ID as identification for NDI function. To setup NDI function,
please refer to NDI Function section.
Power Up to Preset/ Power off to preset: If enabling Power Up/Off to Preset function, the
camera will move to the saved preset point in the field when the camera powers up/off.
Reboot:
To restart the camera from web page.
Customized Function:
Ability to execute some specific functions by using VISCA command.
To Next Page
Loading...
