AVer TR310 - Setup the Camera; OSD Menu; Setup IP Address of the Camera; Static IP

18
Setup the Camera
OSD Menu
Press button on the remote controller to call out the OSD menu and use
▲
,
▼
,

,

and
button to operate the OSD menu.
Setup IP Address of the Camera
Static IP
1. Press button on the remote controller to call out OSD menu.
2. Go to
Network
>
Static IP
.
[Note]
Turn the DHCP off before setup static IP (Network > DHCP > Off).
3. Select the
IP address
,
Gateway
,
Mask
, and
DNS
to configure. Press
and use

,

,
number pad to enter the data.