8
zoom in when people don’t move
anymore for 1~5 seconds,
depending on the framing speed
you choose.
Preset Framing: Set up preset
points in advance (Only for Preset
points 1~9. Preset 0 is for home
position). Camera tracks one
presenter and shoots the preset
areas instead of focusing and
zooming into presenter.
4. OSD Menu
To call out OSD menu. Not support for
VC520 Pro2
5. Zoom In/Zoom Out
Increase/Decrease the camera zoom.
6. Preset
The Preset button on the remote
serves 2 functions.
To Save a Preset – Move camera to
desired position. Press and hold the
preset button until you receive the save
message on the screen. Select preset
position button 0-9 to store the current
camera position. Repeat steps if
needed.
To Load a Preset - Press the preset
button and preset position button 0-9 to
load a saved camera position. Repeat
steps if needed.
7. Preset
Position/Number
Buttons
Preset position buttons are used in
conjunction with the Preset button to
save positions. There are a total of 10
presets.
Press the preset button first and then
press 0~9 for the camera to move to
the saved position.
[Notes]
Press and hold the number button
“
” for 1 second to turn on or off
the WDR function.
Press and hold the number button
To Next Page
Loading...