7
Remote Control
1. Camera Select
One remote can control up to 3 AVer
VC/CAM/VB series cameras. You can
use AVer PTZApp 2 to set numbers
associated with each camera, and then
select which camera you would like to
control using the remote.
[Note] If you only have one camera
and don’t need to do custom setting,
the default is camera 1. If you press
camera 2 or 3 on the remote control,
you will find your remote can’t control
your camera. In this case, please press
camera 1 on your remote again.
2. Camera Directional
Control
Use the directional buttons on the
remote to control the direction of the
camera. Press the directional button to
move the camera or press and hold to
continuously pan or tilt.
3. SmartFrame
One-click automatic FOV adjustment
to fit all participants.
Press for 1 second to switch the
SmartFrame function among Manual
Framing/Auto Framing/Preset Framing
modes. A message (as figures shown)
will display on the screen to indicate
the mode.
[Notes]
SmartFrame deploys face and body
defection technology. People
wearing masks or in side facial
profiles still can be detected. The
maximum detection distance is
7~10 meters.
Camera will track people while
moving. It will start to focus and
To Next Page
Loading...