8
“ ” for 1 second to turn on or off the
SmartFrame function.
Press and hold the number button
“ ” for 1 second to enable or disable
RTMP streaming function.
Press and hold the number button
“ ” for 1 second to force camera to
enter sleep mode. This will end any
video streaming. To wake up the
camera, press the button or any
directional button for 1 second. This
mode is not functional while USB
streaming is on.
8 Brightness - Decrease the brightness.
9 Call/Answer
Answer a call or start a call.
10 Enter
Confirm selection.
11
Mute/Unmute
Mute/Unmute the speakerphone.
12
Volume Up/Down Volume up or down.
13 Preset Hot Key
Press to move the camera to the preset
position you have set.
14 Brightness + Increase the brightness.
15
Hang Up End the call.
To Next Page
Loading...
