24
PTZ Control
You can control your camera, set up and reset up to 10 preset positions, edit preset position name and
more.
To set up a preset position:
1. In main screen, use
▲
,
▼
,
,
and zoom in/out buttons to adjust the camera view to the desired
position.
2. Select Set button above the preset thumbnails > click on the preset thumbnail to save the preset.
3. Select icon to edit name of preset position. Click anywhere to save.
4. After setting up the preset positions, you can start performing the function. Select the Load button
and then click on the preset numbers, the live screen will move to the preset screen view.
To Next Page
Loading...
