AVer VC520 Pro3 - Remote Control Overview; Camera Control Buttons; Preset Management

7
Remote Control
Name
Function
1 Camera Select
Select a camera to operate. Specify a
number in the PTZApp 2 or web interface:
Settings > Camera Binding.
All three selections can by default operate
the camera.
2 Direction
Press once for incremental movement or
press and hold for continuous pan or tilt.
3 SmartFrame
Short press to fit all participants.
Long press (1 second) to switch among
modes.
For more details about the tracking modes,
refer to <Camera Settings
>--Tracking
Modes.
4 OSD Menu
Call out On Screen Display menu.
5 Zoom In/Zoom Out
Press to zoom in and out.
6 Preset
The Preset button on the remote serves 2
functions:

Save a Preset:
1. Move the camera to desired position.
2. Press and hold the preset button until
you see the saving message on the
screen.
3. Select a preset position button from 0-9
to save the current camera position.
Repeat steps if needed.

Load a Preset:
Press the Preset button and preset
number button to load a saved camera
position. Repeat steps if needed.
7
Preset
Position/Number
Buttons
Press the Preset button first, and press
the number buttons to move the camera to
the saved position.
[Tips]
 Press and hold the number button
“ ” for 1 second to turn on or off the
WDR function.
 Press and hold the number button